Mechanical Installation - ABB MicroFlex e190 Quick Installation Manual

4
• For installation in Canada, branch circuit
protection must be provided in accordance
with Canadian Electrical Code and any
applicable provincial codes. To fulfill this
requirement, use the UL classified fuses.
• For use in Canada: Transient surge
suppression shall be installed on the line side
of this equipment and shall be rated 240 V
(phase to ground), 240 V (phase to phase),
suitable for overvoltage category III, and
shall provide protection for a rated impulse
withstand voltage peak of 2.5 kV.
• The drive provides overload protection in
accordance with the National Electrical Code
(NEC). See the User's Manual for overload
protection settings.
• The drive can provide an overload current of
300% of rated current for a maximum of 3 s.
See user manual.

Mechanical installation

Fasten the drive module to the mounting base
using screws through the two mounting holes.
Quick installation guide - MicroFlex e190