ABB ACH580 Quick Start Up Manual
Drives with hvac control program
Hide thumbs
Also See for ACH580:
- User manual (257 pages) ,
- Installation, operation and maintenance manual (157 pages) ,
- Quick start up manual (104 pages)
Related Manuals for ABB ACH580
Summary of Contents for ABB ACH580
- Page 1 Quick start-up guide ACH580 drives with HVAC control program ABB drives for HVAC Quick start-up guide ACH580 drives with HVAC control program English .... English..
- Page 2 © 2017 ABB Oy. All Rights Reserved.
- Page 3 (3AXD50000027537 [English]). Note: Start-up with the First start assistant on an Hand-Off-Auto Automatic selection of supply voltage is not supported in ACH580-31. You must select the control panel supply voltage manually using parameter 95.01. See steps for Commissioning with parameters on page 9.
- Page 4 (OK). Note: After you have selected the language, it takes a few minutes to download the language file to the control panel. ACH580-31 drives: Select the supply voltage with parameter 95.01. Select Commission the ACH580 and press (Next). Select the localization you want to use and press (Next).
- Page 5 EN – Quick start-up guide 5 To select a value in an edit view: • to select the value. Press (Save) to accept the new setting, or press (Cancel) to go back to the previous view without making changes. Set the date and time as well as date and time display formats.
- Page 6 6 EN – Quick start-up guide Check that the motor data is correct. Values are predefined on the basis of the drive size but you should verify that they correspond to the motor. Start with the motor type. • Go to the edit view of a selected row by pressing •...
- Page 7 EN – Quick start-up guide 7 Check the direction of the motor. If it is forward, select Yes, motor is spinning forward and press (Next) to continue. If the direction is not forward, select No, fix direction and press (Next) to continue. The first start is now complete and the drive is ready for use.
- Page 8 8 EN – Quick start-up guide In the Main menu, select Primary settings and press (Select) to enter the Primary settings menu. Select HVAC quick setup and press (Select) (or Go through the items on the menu. To adjust the value of a parameter, press (Edit), adjust the value using keys and press...
- Page 9 EN – Quick start-up guide 9 Select a connection you want to check and press (Se- lect) (or To view the details of a parameter that cannot be adjusted via the I/O menu, press (View). To adjust the value of a parameter, press (Edit), adjust the value using keys and press...
- Page 10 10 EN – Quick start-up guide 4 – Diagnostics menu Use the Diagnostics menu to make sure that the setup is functioning correctly. In the Main menu, select Diagnostics and press (Se- lect) (or Select the diagnostics item you want to view and press (Select).
- Page 13 Product and service inquiries Address any inquiries about the product to your local ABB representative, quoting the type designation and serial number of the unit in question. A listing of ABB sales, support and service contacts can be found by navigating to www.abb.com/searchchannels.
- Page 14 Contact us www.abb.com/drives 3AXD50000047658 A (EN) EFFECTIVE 2017-10-11 3AXD50000047658A...