Degrees Of Protection; Materials; Weee Notice - ABB MicroFlex e190 User Manual

158 Technical data

Degrees of protection

MicroFlex e190 complies with EN 60529, IP20.
For UL purposes the MicroFlex e190 is defined as an open-type, three phase single
axis servo amplifier.
The drive must be installed in a cabinet to fulfill the requirements for shielding from
contact. Access to the cabinet should be restricted to trained maintenance staff.
See chapter Cabinet construction.
The top surface of cabinets / enclosures which are accessible when the equipment is
energized shall meet at least the requirement of protective type IP3x with regard to
vertical access only.

Materials

Drive enclosure
Packaging
Disposal


WEEE notice

According to the requirements of the Waste Electrical and Electronic
Equipment Directive (WEEE) the following information is provided.
This symbol indicates that the product must not be disposed of with other
general waste. It is your responsibility to dispose of your waste electrical
equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help conserve natural
resources and ensure that it is recycled in a manner that protects human health and
the environment. For more information about where you can recycle your waste,
please contact your local authority.
PC/ABS, color NCS 1502-Y (RAL 9002 / PMS 1C Cool Grey) and RAL
9017 (Traffic black).
Hot-dip zinc coated steel sheet extruded aluminum AlSi.
Corrugated cardboard, PP bands.
The drive contains raw materials that should be recycled to preserve
energy and natural resources. The package materials are
environmentally compatible and recyclable. All metal parts can be
recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most
recyclable parts are marked with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors
and printed circuit boards can be landfilled. The DC capacitors contain
electrolyte, which is classified as hazardous waste within the EU. They
must be removed and handled according to local regulations.
For further information on environmental aspects and more detailed
recycling instructions, contact your local ABB distributor.