Dimensions And Weights; Ambient Conditions - ABB MicroFlex e190 User Manual

Dimensions and weights

For basic weights and dimensions, see

Ambient conditions

Environmental limits for the drive are given below. The drive is to be used in a heated,
indoor, controlled environment.
Installation site altitude 0 to 2000 m (6560 ft) above
Air temperature
Relative humidity
Contamination levels
Sinusoidal vibration:
EN 60068-2-6: 2008
Shock:
EN 60068-2-27: 2009
IEC 60068-2-27:2008
Free fall
Main dimensions
Operation
installed for stationary
use
sea level. [See also section
Altitude derating on page
149.]
1.6 A model:
0 to +50 °C (32 to 122 °F)
3 A, 6 A, 9 A models:
0 to +55 °C (32 to 131 °F).
No frost allowed. 
See section Derating
page 149.
0 to 95%
No condensation allowed. Maximum allowed relative humidity is 60%
in the presence of corrosive gases.
No conductive dust allowed.
The drive must be installed
in clean air according to
enclosure classification.
Cooling air must be clean,
free from corrosive materials
and electrically conductive
dust.
Tested according to,
mechanical conditions:
2...9 Hz: 3.0 mm (0.12")
9...200 Hz: 1g
–
Not allowed
on page 35.
Storage
in the protective
package
-
-40 to +70 °C
(-40 to +158 °F)
on
Max. 95%
–
Max. 10g, 11 ms
76 cm (30")
Technical data 157
Transportation
in the protective
package
-
-40 to +70 °C
(-40 to +158 °F)
Max. 95%
–
Max. 10g, 11 ms
76 cm (30")