Communication Errors - ABB MicroFlex e190 User Manual

132 Fault tracing


Communication errors

Code Error
8000 EtherCAT AL status code
(_ecETHERCAT_AL_STAT
USCODE)
8001 CIP configuration error
(_ecCIP_CFG_ERROR)
8002 POWERLINK error code
(_ecPOWERLINK_ERROR)
8003 PROFInet error code
(ecPROFINET_CFG_ERRO
R)
Cause
This error is listed together with a
Profile Code in the Mint WorkBench
Error Log. Note: The displayed
profile code must be converted to
hexadecimal to give the specific
EtherCAT error code.
This error is listed together with a
Profile Code in the Mint WorkBench
Error Log. The displayed profile code
must be converted to hexadecimal to
give the specific CIP general status
code.
This error is listed together with a
Profile Code in the Mint WorkBench
Error Log. The displayed profile code
must be converted to hexadecimal to
give the specific POWERLINK error
code.
This error is reported when multicast
MAC filter configuration fails.
What to do
This error status indicates that the
EtherCAT master has been sent an
error code by the drive. Check the error
log to determine what the "real" drive
error code is.
This error status indicates that the
EtherCAT master has been sent a CIP
error code by the drive. Check the error
log to determine what the "real" drive
error code is.
This error status indicates that the
POWERLINK master has been sent an
error code by the drive. Check the error
log to determine what the "real" drive
error code is.
This error status indicates that the
PROFInet master has tried to configure
the device ID but has failed.