Electrical Installation: Ac Input / Dc Input, Motor And Brake; What This Chapter Contains - ABB MicroFlex e190 User Manual

Electrical installation:
AC input / DC input, motor
and brake

What this chapter contains

The chapter describes how to connect input power cables, motor and brake resistor.
WARNING! The work described in this chapter may only be carried out by a
qualified electrician. Follow the instructions in chapter
Ignoring the safety instructions can cause injury or death.

Make sure that the drive is disconnected from the input power during
installation. If the drive is already connected to the input power, wait for 5
minutes after disconnecting the input power.

Electrical installation: AC input / DC input, motor and brake 49

6
Safety on page 13.