Rohs Compliance; China Rohs Marking - ABB MicroFlex e190 User Manual



RoHS compliance

MicroFlex e190 is in conformity with Directive 2011/65/EU of the European
parliament and of the council of 8th June 2011 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment. The RoHS declaration
3AXD10000540158 is available on new.abb.com/motion.


China RoHS marking

The People's Republic of China Electronic Industry Standard (SJ/T
11364-2014) specifies the marking requirements for hazardous
substances in electronic and electrical products. The green mark is
attached to the drive to verify that it does not contain toxic and hazardous
substances or elements above the maximum concentration values, and
that it is an environmentally-friendly product which can be recycled and
reused.
Part
Lead
(Pb)
PCB O
O
Metal parts
Plastic parts O
O: Indicates that said hazardous substance contained in all of the homogeneous materials for this part is
below the limit requirement of GB/T 26572.
X: Indicates that said hazardous substance contained in at least one of the homogeneous materials used for
this part is above the limit requirement of GB/T 26572. The limits are:
Pb: 1000 ppm (0.1%)
Cr6+: 1000 ppm (0.1%)
Mercury Cadmium
(Hg) (Cd)
O O
O O
O O
Hg: 1000 ppm (0.1%)
PBB: 1000 ppm (0.1%)
Hazardous substances
Hexavalent Polybrominated
chromium biphenyls (PBB)
(Cr(VI))
O O
O O
O O
Cd: 100 ppm (0.01%)
PBDE: 1000 ppm (0.1%)
Technical data 159
Polybrominated
diphenyl ethers
(PBDE)
O
O
O