Docking/Undocking The M540; M500 Front View With M540 Docked; M500 Side View (M540 Undocked) - Dräger Infinity Acute Care System M540 Instructions For Use Manual

Docking/undocking the M540

The following diagram shows the side and front
panel of the M500 which holds the M540 in place.

M500 front view with M540 docked

A
B
C

M500 side view (M540 undocked)

A
B
C
A M500 locking tab
B M540 patient monitor
C M500
D Swivel mount (optional) and mounting clamp
E Release button
Instructions for use Infinity Acute Care System – Infinity M540 SW VG4.n
E
E
D
To dock the M540
1 Align the curved portion of the M540 with the
curved portion of the M500.
2 Press the M540 (B) into the M500 (C) until it
'clicks' into place.
3 Push the locking tab (A) of the M500 toward the
front, to the locked position
M540 into place.
To lock the M540 into place permanently, see
page 72.
To undock the M540
1 Push the locking tab (A) of the M500 toward the
back. If the locking tab does not move, it has
been locked. To unlock the M540, see page 72.
2 Hold the M540 firmly and press one of the M500
release buttons (E – see arrow).
3 Pull the M540 (B) out of the M500 (C).
E
B
C
Assembly and preparation
, to fasten the
71