Dräger Infinity Acute Care System M540 Instructions For Use Manual page 253

Keep bed label
Bed label
Instructions for use Infinity Acute Care System – Infinity M540 SW VG4.n
Yes (default)
No
User selectable; the default
setting is blank
– In an IACS configuration: The M540 retains
the bed label of the Cockpit when it un-
docks. Any changes to the M540 bed label
do not have any effect. If the patient is also
monitored by the ICS, the data continue to
display in the same viewport when the
M540 is undocked.
– In standalone mode: The M540 retains the
bed label configured on the M500.
The M540 retains the bed label configured in
the Wireless network dialog window when it
is undocked. If the wireless bed label is
changed while wireless, the bed label is auto-
matically updated at the M540 and over the
network.
If the patient is monitored by the ICS, the data
are removed from the viewport. A message
appears in the viewport that the M540 is dis-
connected. An offline message appears if the
wireless bed label has not been configured.
Allows you to enter the bed label on the alpha-
numeric keypad (limited to 7 characters).
The Keep bed label setting determines what
happens to the bed label – see above for de-
tailed information.
System configuration
253