Connecting The Mpod - Quadhemo - Dräger Infinity Acute Care System M540 Instructions For Use Manual

Invasive blood pressure (IBP)
Connecting the MPod – QuadHemo
The MPod – QuadHemo connects directly to the
M540.
A
E
G
C
A Invasive blood pressure connector on the M540
B MPod – QuadHemo
C Red pod connection cable connector
D Transducer slot
E Grey pod connection cable connector
F Transducer cable
G Transducer adapter cable
210
B
D D
D
F
Instructions for use Infinity Acute Care System – Infinity M540 SW VG4.n
To connect the MPod – QuadHemo
1 Connect one end of connection cable (C) to the
connector located on the right side of the
MPod – QuadHemo (B).
2 Connect the other end of the connection cable
(E) to the gray Hemo connector of the M540 (A).
3 Insert the transducers into the transducer slots
(D).
4 Connect the transducer cables (F) to the trans-
ducer adapter cable (G).
The transducer adapter cables are permanently
fastened to the back of the MPod – QuadHemo.