Pulse Co-Ox (Masimo) Profile Settings; Spo 2 (Nellcor) Profile Settings - Dräger Infinity Acute Care System M540 Instructions For Use Manual

Operating concept
Setting
The Pulse CO-Ox profile settings are configured in the following dialog windows
Alarm
(On/off setting)
Upper and lower alarm limits
Archive
Pulse CO-Ox 1
Pulse CO-Ox 2
Pulse CO-Ox 3
SpHb Averaging
Color
(Color of the waveform and
parameter)
(Touch the Pulse CO-Ox parameter box > Settings >
SpHb Cal
PVI Averaging
The SpO
Alarm
(On/off setting)
Upper and lower alarm limits
Archive
Tone volume
Tone source
Bar graph
Response mode
SatSeconds
58
Patient default User default

Pulse CO-Ox (Masimo) profile settings

Two separate Pulse CO-Ox limits dialog window
(Touch the Pulse CO-Ox parameter box)
x
x
x
Settings 1 dialog window
(Touch the Pulse CO-Ox parameter box > Settings > Settings 1)
x
x
x
x
x
Settings 2 dialog window
x
x
SpO (Nellcor) profile settings
2
profile settings are configured in the following dialog windows
2
SpO limits dialog window
2
(Touch the SpO
x
x
x
Settings dialog window
(Touch the SpO
x
x
x
x
x
Instructions for use Infinity Acute Care System – Infinity M540 SW VG4.n
Comments (if applicable)
These settings can be configured for
the following parameters in two sep-
arate Pulse CO-Ox limits dialog
windows: SpHb/SpHbv, SpCO,
SpMet, PVI.
Settings 2
parameter box)
2
These settings can be configured
separately for SpO
parameter box > Settings)
2
> enter password)
and PLS.
2