Remove A Drive From A Drive Carrier; Installing A Drive Carrier; Removing The Drive From The Drive Carrier - Dell EMC XC Core XC6515 Installation And Service Manual

Figure 31. Installing a drive carrier
Next steps
If removed, Install the front

Remove a drive from a drive carrier

Prerequisites
• Follow the safety guidelines listed in the
• If installed, Remove the front
Steps
1. Using a Phillips #1 screwdriver, remove the screws from the slide rails on the drive carrier.
2. Lift the drive out of the drive carrier.
Figure 32. Removing the drive from the drive carrier
bezel.
Safety instructions.
bezel.
Installing and removing system components 67