1. Follow the safety guidelines listed in the
2. If installed,
remove the front
3. Remove the drive carrier or remove the drive blank when you want to assemble the drives in to the system.
Steps
1. Slide the drive carrier into the drive slot.
2. Close the drive carrier release handle to lock the drive in place.
Figure 43. Installing a drive carrier
Next steps
If removed,
install the front
Removing the drive from the drive carrier
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
Steps
1. Using a Phillips #1 screwdriver, remove the screws from the slide rails on the drive carrier.
2. Lift the drive out of the drive carrier.
72
Installing and removing system components
Safety instructions
bezel.
bezel.
Safety instructions
bezel.
on page 46.
on page 46.