NOTE:
Ensure that the drive carrier's release handle is in the open position before inserting the carrier into the slot.
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
3.
Remove the drive carrier or drive blank
Steps
1. Slide the drive carrier into the drive slot.
2. Close the drive carrier release handle to lock the drive in place.
Figure 41. Installing the drive carrier
Next steps
1.
If removed, install the front
Removing the drive from the drive carrier
Prerequisites
1. Follow the safety guidelines listed in the
2. If installed,
remove the front
3.
Remove the
drive.
Steps
1. Using a Phillips #1 screwdriver, remove the screws from the slide rails on the drive carrier.
2. Lift the drive out of the drive carrier.
64
Installing and removing system components
Safety instructions
bezel.
when you want to assemble the drives in to the system.
bezel.
Safety instructions
bezel.
on page 43.
on page 43.