System Halt - MIMAKI UJV100-160 Operation Manual

Chapter 5 Dealing with Problems
Error Message
number
b1d BaseIO PCB V24-A
b21 SLIDER1 PCB V3R3
b22 SLIDER1 PCB V2R5
b23 SLIDER1 PCB V1R8
b24 SLIDER1 PCB V1R2
d09 HD MEMORY [1234]

SYSTEM HALT

Error Message
number
000 Message
406 WIPER ORG
Cause
• A problem was detected with
the slider PCB power supply.
• A problem was detected with
head internal memory.
• Turn off the power on the machine and turn it on after a while.
"Turning Off the Power"(P. 31)
1. Clean the wiper and around the wiper.
"Wiper Cleaning"(P. 88)
2. Turn off the power on the machine and turn it on after a while.
"Turning Off the Power"(P. 31)
128
Corrective action
• Turn off the power on the machine and
turn it on after a while.
the Power"(P. 31)
• Turn off the power on the machine and
turn it on after a while.
the Power"(P. 31)
Corrective action
"Turning Off
"Turning Off