MIMAKI UJV100-160 Operation Manual page 80

Chapter 3 Settings
3
Press the [ENTER] key.
• The transmission results are displayed.
• An error code will be displayed if the test email transmission is unsuccessful. Refer to the error
code list and take appropriate action.
• Emails may not necessarily be delivered even if they have been sent. Check the terminal
receiving the email for spam email filters.
• For more information on server settings or other topics, contact your network administrator
or service provider.
4
Press the [ENTER] key once the test is complete.
l Error Code List
Error code
10 Network connection error
20 No valid email address
11003 No POP server was found
or the DNS server could not
11004
be accessed.
11021 Unable to connect to POP
server
12010 An error was returned from
the POP server.
13000 POP authentication failed
10013 No SMTP server could be
found or the DNS server
10014
could not be accessed.
10021 Unable to connect to SMTP
server
10*** An error was returned from
the SMTP server or there
11***
was no response.
20***
21***
12*** The sender email address is
invalid.
13*** The email recipient could be
found or the email address
is invalid.
22000 SMTP authentication error
22008
Error code
Likely cause
• Check to confirm that this machine is connected to a network.
• Check the IP address for this machine.
• Check if the network setup allows this machine to use DNS.
• Enter a valid email address.
• Check the POP server address.
• Check if the network setup allows this machine to use DNS.
• Check the POP server settings.
• Check the firewall settings.
• Check the POP server settings.
• Check the user name and password.
• Check the APOP settings.
• Check the authentication method.
• Check the SMTP server address.
• Check if the network setup allows this machine to use DNS.
• Check the SMTP server settings.
• Check the SMTP port number.
• Check the firewall settings.
• Check the SMTP server settings.
• Communication is not possible with a server that requires SSL
• Check the protocol filter settings.
• Set an email address corresponding to the server account.
• Check the email address.
• This error may not always be detected even if the email
• Set an email address corresponding to the server account.
• Check the authentication method.
Corrective action
communication.
address is incorrect.
80