Cover (Exterior) Cleaning; When Not In Use For Extended Periods - MIMAKI UJV100-160 Operation Manual

Chapter 4 Maintenance

Cover (Exterior) Cleaning

• Do not allow liquids to get inside the product. Ingress of liquids into the product may lead to
failure, electric shock, or fire.
• For heavy soiling, wipe using a soft cloth soaked in dilute detergent and thoroughly wrung out.

When Not in Use for Extended Periods

Clean as follows if the product is not used for one week or longer:
Is [NEAR END] or [INK END] displayed?
• Washing liquid and ink is aspirated during the washing operation. Washing is not possible if an error occurs during
this process. Replace with new ink.
1
In LOCAL mode screen, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Custody Wash], then press the [ENTER] key.
• The carriage moves over the platen.
3
Open the front cover.
4
Clean the wiper and bracket.
"Wiper Cleaning"(P. 88)
5
Press the [ENTER] key once cleaning is complete.
• "Cap Cleaning Completed (Next)[ENT]" appears on the display.
6
Clean the cap rubber.
"Cap Cleaning"(P. 89)
Check beforehand
98