MIMAKI UJV100-160 Operation Manual page 115

3
Open the maintenance cover.
4
Remove the LED glass.
• Unclip the claw and slide to the side to remove.
• Be careful not to apply too much force when unclipping the claw. Disregarding this precaution may
result in breakage of the claw.
5
Insert new LED glass.
• Insert until it clicks into place. Confirm that the claw is engaged.
6
Press the [ENTER] key once replacement is completed.
7
Close the maintenance covers, then press the [ENTER] key.
Claw
115
Chapter 4 Maintenance
4