Print Process - MIMAKI UJV100-160 Operation Manual

Chapter 2 Printing

2.1 Print Process

1.
Turn on the power.
"Turning On the Power"(P. 30)
2.
Connect a RIP PC to the machine.
"Using a USB 2.0 Interface Cable"(P. 33)
"Using a LAN Cable"(P. 33)
3.
Set up the RIP software.
"Installing RIP Software"(P. 36)
"Obtaining Color Profiles"(P. 36)
"Setting Up RIP Software"(P. 37)
4.
Adjust print head height.
Adjust the height adjustment lever to suit the medium.
5.
Load the media.
[END/POWER] key
(required first time only)
(required first time only)
"Adjusting Print Head Height"(P. 51)
Height adjustment lever
48
Hi
Low