Waste Ink Tank Replacement - MIMAKI UJV100-160 Operation Manual

Chapter 4 Maintenance

Waste Ink Tank Replacement

Ink used during head cleaning and other processes is collected in the waste ink tank at the lower right of the
product.
This product keeps track of the waste ink level. A "Check Waste Ink Tank" message appears when the
preset level is reached. Use this a guide for replacing the waste ink tank.
• For a 2-liter tank, the preset level is 80 % (1.6 liters).
• Continuing to use the product without disposing of the waste ink may result in waste ink
overflowing from the waste ink tank. Visually check ink levels in the waste ink tank about once a
week.
When "Check Waste Ink Tank" message appears
1
The "Check Waste Ink Tank" message appears on the display.
2
Check the waste ink levels in the waste ink tank.
• If you note any discrepancies from actual levels, proceed to the next step.
• If there is no discrepancy, replace (dispose of) the waste ink tank referring to
waste ink tank.](P.
3
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
4
Select [Replace Wasteinktank], then press the [ENTER] key.
• "Replace Wasteinktank Level: 80% (1.6L)" appears on the display.
5
Press to adjust the level.
6
Press the [ENTER] key once adjustment is complete.
Replace the waste ink tank.
• Wear safety glasses, gloves, and a mask when handling ink, maintenance cleaning solution,
waste ink, or other solutions used with this machine. Leaking ink may adhere to the skin or get
into your eyes or mouth.
1
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Replace Wasteinktank], then press the [ENTER] key.
• "Replace Wasteinktank Level: 80% (1.6L)" appears on the display.
108).
108
[Replace the