MIMAKI UJV100-160 Operation Manual page 38

Chapter 1 Before Using This Product
1
Launch RasterLink.
• The [Printer Management] screen appears.
• To add a new model, launch RasterLink, then select [Environment] > [Printer Management].
2
Register UJV100-160.
(1) Click [Add].
(2) Set the specifics for UJV100-160.
• Model: Select the model.
• Color: Select the ink set filled.
• Output port: Select the cable connected.
• Available Printers: Select UJV100-160 connected.
• Printer name: Enter a name as required.
(3) Click [OK].
• A confirmation screen appears.
(4) Click [Yes].
• Printer registration starts.
• For more information, refer to the RasterLink reference guide.
https://mimaki.com/download/software.html
38