MIMAKI UJV100-160 Operation Manual page 42

Chapter 1 Before Using This Product
4
Attach the special cap to the ink bottle.
(1) Place the special cap on the bottle.
(2) Use the tightening jig to tighten the special cap in place.
(3) Turn the bottle upside-down to check that no ink leaks occur.
• Do not overtighten the special cap. Disregarding this precaution may result in damage or
idling. In case of idling, repeat the steps from (1).
• Do not leave ink bottles with special caps fitted for extended periods. Doing so may result
in ink hardening.
l Mount ink bottles
• Ink bottle Arrangement
The order of Ink bottle to be set depends on the ink set you are currently using. Check the ink slot numbers,
then insert the correct color Ink bottle.
Tightening jig
1
3
4
5
Align the arrows
2
7
8
6
42
Do not turn
beyond the
arrows!