MIMAKI UJV100-160 Operation Manual page 44

Uv
Hide thumbs Also See for UJV100-160:
Table of Contents

Advertisement

Chapter 1 Before Using This Product
3
Press the OK button.
• The information on the ink IC chip is registered.
• Do not dispose of the ink IC chip. It is needed to rewrite the ink registration information on the ink
IC chip.
• If the warning message appears, take appropriate actions by referring to the following.
Message
Color: Magenta
Expiration: 2021/01/01
Caution:
XX days until expiration
Registered IC chip
Unable to register.
The registration limit was
exceeded.
Unable to register.
XXXXXXX (Error name)
Ink Expiration Over
Ink type
Ink Color
WRONG INK IC
Replace Ink Bottle
l Ink IC Chips
Each ink IC chip has a marking indicating color information.
Ink IC Chip Registrasion
Color : Magenta
Expiration : 2021/01/01
OK
Cause
• The ink expiration date is
approaching.
• The ink IC chip inserted is
already registered.
• More than one was
registered for each slot.
• The ink IC chip could not be
registered due to an error.
• The ink is two months past
its expiration date and
cannot be used.
• A different ink type is
registered on the ink IC chip.
• A different ink type is
registered on the ink IC chip.
• An error occurred with the
information on the ink IC
chip.
• The ink IC chip was
registered when an ink end
or ink near-end error
occurred.
Marking location
44
Corrective action
• Use the ink before the expiration period.
• Replace with a new ink IC chip. Insert Ink IC
Chip
• Use up the equivalent of one bottle before
registering.
• Insert the correct ink IC chip. Insert Ink IC
Chip
• Replace with new ink. Printing is not
possible.
"When Ink End is
Displayed"(P. 39)
• Insert an ink IC chip for the correct ink type.
Insert Ink IC Chip
• Insert an ink IC chip for the correct ink color.
Insert Ink IC Chip
1.
Check to confirm the ink IC chip was
inserted correctly. Insert Ink IC Chip
2.
Turn off the main power and wait a while
before turning back on.
Power"(P. 31)
3.
Replace with new ink.
Displayed"(P. 39)
• Mount a new ink bottle and register the ink
IC chip.
"Turning Off the
"When Ink End is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents