MIMAKI UJV100-160 Operation Manual page 101

6
Press the [ENTER] key.
• Discharging/filling/cleaning starts automatically.
• The elapsed time is displayed.
Shake the white ink bottle.
This product counts the time elapsed after stirring the white ink Ink bottle. The "Shake White Ink Bottle"
message appears when a preset count is reached.
• Timing when the message appears
– Every 24 hours (or when the power is turned on if the power was turned off).
• Wear safety glasses, gloves, and a mask when handling ink, maintenance cleaning solution,
waste ink, or other solutions used with this machine. Leaking ink may adhere to the skin or get
into your eyes or mouth.
1
The "Shake White Ink Bottle" message appears on the display.
2
Rotate the lever on the tank section from left to right.
• Never attempt to rotate the ink bottles. Doing so may result in leaking ink.
3
Lift the ink bottles vertically.
• Check to confirm that the light-blocking cover is closed when removing ink bottles. Close
the light-blocking cover by hand if it is not closed. If the light-blocking cover is left open,
the ink may harden, resulting in printer failure.
• Be careful to prevent ink leaks from the bottles.
Light-blocking cover
101
Chapter 4 Maintenance
4