MIMAKI UJV100-160 Operation Manual page 45

Ink Color
Cyan
Magenta
Yellow
Black
White
Clear
• Insert the ink IC chip contained in the ink package. The ink IC chip stores information such as
the ink color, remaining amount, and expiration date. Printing is not possible if a wrong IC chip
is inserted.
l Checking Ink IC Chip Registration
To check ink IC chip registration information, press the [ENTER] key in LOCAL mode screen.
"Displaying Machine Information (Local Guidance)"(P. 28)
• The expiration date and total amount of ink registered is displayed.
• "---" will appear if no ink IC chip is registered or if no ink remains. If "---" appears, a new ink IC chip can
be registered.
l Rewrite the ink registration information on the ink IC chip
Even if ink remains in the ink bottle, you can replace with a new ink bottle. If circumstances make it
unavoidable to replace the ink bottle, rewrite the ink information registered in this machine on the ink IC chip.
Doing so makes the ink bottle reusable.
1
Insert the ink IC chip of the bottle to be replaced.
• Use the ink IC chip on which the ink bottle is registered. Other ink IC chips cannot be
used.
2
Press the [FUNC3] key.
• The rewritten ink bottle information is reset, and "Ink IC is not registered" appears.
Chapter 1 Before Using This Product
Marking
(One blue circle)
(One red circle)
(One yellow circle)
(One black circle)
(One white circle)
(Two white circles)
Ink IC Chip Reg. info.
Y ： 2020/01/01
C ： 2020/01/01
M ： ---
K ： 2020/01/01
Ink IC Chip Registrasion
This Ink IC chip has
been registered
Press [FUNC3] key
to Ink IC write back
OK ↓
45
1