MIMAKI UJV100-160 Operation Manual page 52

Chapter 2 Printing
5
Use the height adjustment lever to adjust the height.
• Set the height adjustment lever so that the desired height is at the top. If the lever is not set to the
correct position, problems such as media jamming and misting may occur, resulting in impaired
print quality.
6
Retighten the carriage cover screws.
• Do not touch the height adjustment lever.
7
Press the [ENTER] key once adjustment is complete.
8
Close the front cover, then press the [ENTER] key.
Height adjustment lever
52
Hi
Low