Wiper Cleaning - MIMAKI UJV100-160 Operation Manual

Chapter 4 Maintenance
Gloves
For more information on other consumable items, refer to our website.
https://mimaki.com/supply/inkjet.html
• Do not store in places accessible to children.

Wiper Cleaning

The wiper wipes off ink adhering to the print head nozzle surface. Continuing to use the dirty wiper may
cause the wiper to which dried ink and dust are attached to rub against the nozzle surface, leading to print
defects (e.g., nozzle clogging, deflection).
• Be careful to avoid leaving fragments from the cleaning stick behind when cleaning. These
fragments will increase the risk of print defects (e.g., nozzle clogging, deflection).
1
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Move To Platen Right End ], then press the [ENTER] key.
• The carriage moves over the platen.
3
Open the front cover.
4
Pull out the wiper.
• Hold the lug at the rear of the wiper, then tilt forward to pull out the wiper.
Item
Lug
88
Code