Chapter 4 Maintenance
5
Replace the media cutter.
(1) Unscrew the cutter screw.
(2) Remove the cutter.
(3) Attach a new cutter.
(4) Tighten the screw to clamp the cutter.
6
Close the carriage cover hatch.
7
Press the [ENTER] key once replacement is complete.
8
Close the front cover, then press the [ENTER] key.
• When disposing of the product, contact an industrial waste disposal operator or dispose of the
product in accordance with the local laws and regulations.
LED Glass Replacement
Replace with new LED glass if the ink hardens and the existing LED glass becomes dirty.
1
In LOCAL mode, select [MENU] > [Maintenance], then press the [ENTER] key.
• The Maintenance menu is displayed.
2
Select [Station] > [Carriage Out] > [Move To Maint. Space], then press the [ENTER] key.
• The carriage moves to the maintenance space.
Screw
114