MIMAKI UJV100-160 Operation Manual page 40

Chapter 1 Before Using This Product
2
Lift the ink bottles vertically.
• Check to confirm that the light-blocking cover is closed when removing ink bottles. Close
the light-blocking cover by hand if it is not closed. If the light-blocking cover is left open,
the ink may harden, resulting in printer failure.
• Be careful to prevent ink leaks from the bottles.
3
Soak up any ink droplets on the special caps.
• Use a wipe filter to soak up ink droplets and prevent dripping.
4
Wipe off any ink on the special caps with paper wipes.
5
Remove the special caps from the ink bottles.
• If the special caps are tight, remove using a tightening tool.
l Preparing Ink Bottles
1
Remove an ink bottle from its carton.
Light-blocking cover
Wipe filter
40