MIMAKI UJV100-160 Operation Manual page 41

2
Shake the ink bottle to the left and right slowly at least 20 times.
• Tighten the ink bottle lid securely, then shake the bottle slowly from left to right to ensure that the
ink moves inside, holding the ink bottle lid with a paper towel.
• When fitting a bottle with only a small amount of ink inside, flip the ink bottle upright and
shake slowly at an angle.
• Shake slowly. If the bottle is shaken too violently, ink may leak out or the air mixed in the
ink may cause nozzle clogging.
3
Remove the ink bottle lid.
• If the mouth of the bottle is fitted with a seal, cut this open using a craft knife. Be careful
not to drop the seal into the bottle.
Chapter 1 Before Using This Product
Repeat the procedure.
41
1