Installation Precautions - MIMAKI UJV100-160 Operation Manual

Installation Precautions

Installation Precautions
• Do not install this machine in environments where flammable substances are present (e.g.,
gasoline, flammable spray, alcohol, thinner, lacquer, powder). This machine is not explosion-
proof. The product poses a risk of explosion.
• Do not install this machine in locations where open flames are present. The ink may ignite.
• Do not place vases, pot plants, cups, cosmetics, containers of chemicals or water, or small
metal objects on top of this machine. Entry into the machine of liquids or metal objects may
result in malfunctions, electric shock, or fire.
• Do not install this machine in humid locations or locations where it may be exposed to splashing
water. Disregarding this precaution may result in machine failure, electric shock, or fire.
• Keep children away from this machine.
• A ventilation system must be provided if this machine is installed in a poorly ventilated area or
sealed room.
• Note the following points when installing an extractor outlet:
(1) The extractor outlet must be installed in accordance with applicable local EHS (environmental, health, and safety)
guidelines.
(2) If the extractor outlet is fitted with a shutoff valve, the valve must be open when this machine is in use.
• Do not install this machine in locations where dust or powder is present. Failure or printing
defects may result (e.g., nozzle clogging, deflection) if dust gets inside this machine.
• Do not install this machine in locations exposed to drafts (e.g., from air conditioning).
Disregarding this precaution may result in dust or powder getting inside this machine.
• Do not install this machine in unstable locations or locations subject to vibration. Disregarding
this precaution may result in failure or printing defects (e.g., nozzle clogging, deflection).
• Do not install this machine in locations exposed to direct sunlight.
• Do not install this machine in locations subject to sudden temperature changes. Disregarding
this precaution may result in printing defects (e.g., nozzle clogging, deflection).
• Do not install this machine in locations exposed to excessive noise from large machinery.
• Permissible operating conditions: 20 °C to 30 °C (68 °F to 86 °F), 35 %RH to 65 %RH (no
condensation)
• Guaranteed accuracy temperature range: 20 °C to 25 °C (68 °F to 77 °F)
14