D.8.6 Towfish Bottle Electronics - Klein 5000 SERIES Operation And Maintenance Manual

Table D-2:
TRANSDUCER 10-PIN
CRYSTAL BULKHEAD
1
GND
Xtal 7 2
Xtal 8 3
Xtal 9 4
Xtal 10 5
Xtal 11 6
Xtal 12 7

D.8.6 Towfish Bottle Electronics

The towfish bottle electronics is shown in Figure D-16.
Figure D-16:
D.8.7 Removing the Towfish Electronics
To remove the towfish
electronics:
1. Remove the towfish nose
cone by unscrewing the
socket head cap screw in
the center with a 8-mm hex
key or driver. Once you
have the nose cone off you
will find the push/pull
assembly shown in
Figure D-17.
This assembly is used to
insert or remove the
electronics from the
pressure housing.
Positioned one way the
Troubleshooting Chart—2P or 2S Connections
RECEIVER
2P/2S
BOARD
7
6
1
2
3
4
5
Towfish Bottle Electronics
Figure D-17:
Towfish
TRANSMITTER
BOARD
—
IN7 TX4
IN8 TX4
IN9 TX5
IN10 TX5
IN11 TX6
IN12 TX6
Push/Pull Assembly
D-43
TEST CODE
Channel 7
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12