Feedback; Resolver X2 - Pilz PMC Series Installation Manual

9 Interfaces
9.6

Feedback

Feedback system
Resolver
ComCoder
Incremental or sine encoder with Hall
Sine Encoder with EnDat/HIPERFACE X1
ACURO Encoder
Sine encoder without data channel
Incremental encoder (A quad B)
9.6.1 Resolver (X2)
Our rotatory servomotors PMCtendo AC1/AC2/AC3 are fitted as standard with 2-pole hollow-
shaft resolvers. It is possible to connect resolvers with 2 to 36 poles to the PMCtendoDD5 and
PMCprimo Drive3. The thermostat contact in the motor is connected via the resolver cable to
X2 and evaluated there.
If cable lengths of more than 100 meters are planned, please contact our customer support.
Installation manual for PMC tendo DD5/PMCprimo Drive3
Conn. See Remark
X2 p. 49 2- to 36 polig
X1 p. 50 A, B, Zero, Hall
X1 p. 51 A, B, Zero, Hall/ Sine, Cosine, Zero, Hall
p. 52 Sine, Cosine, Clock, Data
X1 p. 53 Data (BISS)
X1 p. 55 Sine, Cosine, Zero
X5 p. 54 A, B, Zero
Page 49