Digital And Analog Inputs And Outputs; Analog Inputs (X3) - Pilz PMC Series Installation Manual

9.7

Digital and analog inputs and outputs

9.7.1

Analog inputs (X3)

The servo amplifier is fitted with two programmable differential inputs for analog setpoints.
AGND (X3/7) must always be joined to the GND of the controls as a ground reference.
9.7.1.1 Technical characteristics
•
Differential input voltage max. ± 10 V
•
Ground reference AGND, terminal X3/7
•
Input resistance 10 kΩ
•
Common-mode voltage range for both inputs ± 10 V
•
Update rate: 62,5 µs
Page 56 Installation manual for PMCtendo DD5/PMCprimo Drive3
9 Interfaces