Control Panel Overview - HySecurity StrongArm 14F Programming And Operations Manual

This section provides an overview of the electrical controls found in your gate operator. The illustrations
highlight the various components and describe their function. Each callout explains where to find more
information about the component.
Limit Switches
Two limit switches determine
the open and close positions of
the arm.
Backplate of
Display and
Keypad
Power ON/OFF
Switch
MX3657-01 Rev. D ©2020

Control Panel Overview

Control Panel Overview
Power Module
Provides common and 24VAC & 24VDC
terminals. Refer to Overview of the STC
and Power Supply Board on page 76.
Transformer:
Provides the connections for AC power
and steps down the voltage to 24 VAC.
For more information, refer to Control
Transformer Connections (Non-UPS) on
page 35.
HY-5B Vehicle Detectors
Smart Touch Controller:
Provides inputs for peripherals and accessories, 2 electromechanical
user relays (250VAC, 10A), one solid state user relay (30VDC, 3A). For
more information, refer to STC Terminal Inputs on page 78.
hysecurity.com | 800-321-9947
55