Access The Event Log Through The User Menu - HySecurity StrongArm 14F Programming And Operations Manual

Type Alert/Fault/Error Display
ERROR ERROR 10
SLOWDOWN SWITCH
FAIL FAIL
PROGRAM DATA ERR
FAIL
a e
CCess the
NOTE: While you are viewing the event log, the gate operator is in Menu mode and cannot run open or close.
1. To enter the User Menu, press the Menu key twice.
2. Press Next and scroll until "LG 0 (OFF)" appears in the display.
3. Press Select. LG blinks.
4. Press Next to change the number to 1,
LG 1 (ON)
VIEW EVENT LOG
5. Press Select. The most recent event recorded in the log appears.
6. To scroll through the event log, press Next or Prev.
NOTE: Hold down Next or Prev to scroll quickly toward the top or bottom
of the event log.
7. To exit, press Menu. The display resets to LG 0 (OFF).
8. Press Menu again to exit the User Menu and return to Run/Program
mode.
Month / Day
03/17
Description: ALERT 5: BOTH LIMITS TRIPPED
NOTE: Over 300 events can be recorded before the software begins overwriting the existing log history.
112
hysecurity.com | 800-321-9947
Buzzer Chirp Sequence
3 chirps per second once per
minute
3 chirps per second once per
minute
l
Vent oG throuGh the
Time (HH:MM)
15:27
Possible Cause & Suggested Corrective Action
VFD only. The operator tripped the fully Open or Close limit before
the Slowdown limit tripped. Check:
• Slowdown limit wiring and adjustment
• Adjustment of the limit ramps to verify that the limit switch
is being tripped. Manually trip the slowdown limit. OPEN
SLOWDOWN or CLOSE SLOWDOWN should appear on the
display which indicates that it is working properly.
• Try turning off the power to the operator and having the customer
re-seat all of the various connectors and cables.
• Upload the latest software release. If the fail does not go away,
contact Technical Support.
u
Event Type
ALE5
StrongArm Programming and Operations
M
ser enu
LG 0 (OFF)
VIEW EVENT LOG
LG 1 (ON)
VIEW EVENT LOG
03/17 15:27 ALE5
BOTH LIMITS TRIP
MX3657-01 Rev. D ©2020