Software Maintenance; Electrical Controls; Clock Battery Replacement - HySecurity StrongArm 14F Programming And Operations Manual

7. Save the START< >_setup.exe file to your desktop.
8. Double-click the file to begin the installation.
9. Click RUN. A setup window appears.
10. Follow the step-by-step instructions to complete the installation.*
11. When the download is complete, log off the HySecurity website. Shortcuts for the S.T.A.R.T. and
STC History Logs should appear on your laptop's desktop.*
*NOTE: Confirm you have administrative rights by clicking the following on your computer screen:
Windows start ->Control Panel ->User Accounts ->User Accounts. See if your name appears as an administrator. If you are
the only user of a computer, you are by default the administrator. If not, you may need to consult with your company's system
administrator prior to downloading the HySecurity S.T.A.R.T. program.
s M
oftWare
The software on the STC board is periodically being enhanced with new features that create an easier install
and improve the on-board diagnostic tools. Be sure to check the HySecurity website for the latest version of
software and operator code before heading out for field maintenance.
e C
leCtriCal
NOTICE: Before servicing, turn off all power switches.
No routine maintenance is needed for the electrical system or controls. If the environment is very sandy or
dusty, or has many insects, be certain to seal all holes in the electrical enclosure. Blow the dust out of the
electric panel with compressed air. Use the Troubleshooting Codes: Table 8 on page 107 to assess and fix
error, alert, and fault codes. If it is necessary to call a distributor for assistance, be sure to have your model and
serial number ready. Other helpful information includes the name of the job, approximate date of installation,
and the service record of the operator, especially if any work has been done recently.

Clock Battery Replacement

A lithium coin battery supports the clock, so the date and time is
retained even when the main power is turned off. Replace the battery
about every five years (or as needed) with a DL 2025, DL 2032, or CR
2025, or CR 2032 battery.
116
hysecurity.com | 800-321-9947
aintenanCe
ontrols
StrongArm Programming and Operations
Battery
MX3657-01 Rev. D ©2020
COM
NO
STATUS