Table 4: Hysecurity Gate Operators Maintaining Object Detection - HySecurity StrongArm 14F Programming And Operations Manual

Turn Power ON.
3
Hydraulic
I/0 Switch
StrongArm Control Box
Answer Initial Setup Prompts.
4
For barrier arms, you will be prompted for USAGE
CLASS and SENSOR 1, SENSOR 2, and SENSOR 3.
Each SENSOR input, whether or not it has a contact or non-contact sensor wired to it, must be programmed to
a non-zero setting before the gate will move.
NOTE: The gate operator will not automatically cycle unless an indication is received that the appropriate number of external
entrapment protection sensors are connected and operational. If your site does not require three sensor inputs, a setting of S1
(NOT USED) must be designated through the Installer Menu for each sensor input (SENSOR 1, SENSOR 2, and SENSOR 3)
Smart Touch and Smart DC Controller: Menu Mode Navigation Buttons
To change data
appearing in the display
Press Select.
Two left characters blink.

Table 4: HySecurity Gate Operators maintaining Object Detection

Table 4 indicates those HySecurity gate operators that may be within the exception parameters of UL 325 or
comply with standards other than UL 325, but continue to maintain object detection capabilities. HySecurity
strongly recommends that you assess every site for entrapment zones and provide the necessary protection to
guard against entrapment.
HySecurity Gate Operator's with
Obstruction Protection (Object Detection)
StrongArm (HTG) 14, 20, 28, 36
StrongArmCRASH (M30/M50)
StrongArmPark DC 10 & DCS 10
StrongArmPark DC 14 & DCS 14
WedgeSmart DC 10 & 10 DCS
WedgeSmart DC 14 & 14 DCS
HydraWedge SM50
50
hysecurity.com | 800-321-9947
NOTE: NOTE: On the next page,
review LED function and how to
provide temporary power to the
sensors.
To navigate through
the Selections
Press Next or Previous.
Continue pressing Next to view
all selections.
Build Year
UL 325 - 2016
2
2
2
2
2
2
StrongArm Programming and Operations
S1 2 (EYE CLOSE)
SENSOR #1 TYPE
To choose what appears
on the display
Press Select.
Blinking characters
become static.
Sensor Inputs automatically set to "NOT USED"
Installer has option to change settings as site design dictates.
DRIVE POWER RS485
1 STOP BUTTON
2
OPEN BUTTON
3
CLOSE BUTTON
REMOTE OPEN AND
4
RADIO CONTROL
5
OPEN/CLOSE
6
OPEN PARTIAL
INTERLOCK OPEN
7
TIME CLOCK OPEN
8
FREE EXIT DETECTOR
DISABLE EXIT DETECTOR
9
DISABLE CLOSE TIMER
10 INSIDE OBSTRUCTION
VEHICLE DETECTOR
OUTSIDE OBSTRUCTION
11
VEHICLE DETECTOR
SHADOW/RESET
12
VEHICLE DETECTOR
SENSOR 1
14
SENSOR COM
15
16
DO NOT USE
17 SENSOR 2
18
DO NOT USE
STATUS
19
SENSOR 3
20
DO NOT USE
CHARGER
21
AC LOSS
HySecurity
22
LOCK INTERLOCK
MX000585
VERSION
23
S/N
EMERG CLOSE
24
FIRE DEPT OPEN
Smart Touch Controller
LED
LIMIT DUAL GATE RADIO OPTIONS
RPM
COM A B COM OPEN +24V +24V S 1
To navigate between
menu items
Press Next or Previous.
Advance - press Next
Previous - press Previous
●
●
●
●
●
●
MX3657-01 Rev. D ©2020
COM
NO
COM