HySecurity StrongArm 14F Programming And Operations Manual page 132

5. Check all those that apply:
‰ Free exit
‰ Open edge
‰ Stop input (1)
‰ IES sensor
‰ WARNING placards mounted on both sides of the barrier arm within sight of vehicle and pedestrian
traffic per UL 325 standards.
6. Sensors programmed properly.
7. If installed, arm lights working properly.
Date:
Operator Serial Number: ____________________________________________________________________
Installer Name (please print): _________________________________________________________________
End user's name (please print): ________________________________________________________________
Site address: _______________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
Notes: ____________________________________________________________________________________
___________________________________________________________________________________________
132
hysecurity.com | 800-321-9947
‰ Inside Obstruction Loop
‰ Close edge
‰ Local Open (2)
‰ Fire Dept. Open
StrongArm Programming and Operations
‰ Outside Obstruction Loop
‰ Open photo eye
‰ Close timer set (3)
‰ Emergency Close
‰ Close photo eye
‰ Radio open (4)
‰ Solenoid lock
MX3657-01 Rev. D ©2020