HySecurity StrongArm 14F Programming And Operations Manual page 18

IMPORTANT SAFETY INFORMATION
HySecurity Vertical Barrier Arm Safety and Traffi c Control
The following photo eye sensors have been shown in testing to provide the best performance when installed with HySecurity
operators. HySecurity supports installers who install recommended sensors. "Compatible Sensors" are still certifi ed to meet
UL 325 6th edition installation with HySecurity operators. Contact the sensor manufacturer for specifi c recommendations for
use.
All protection sensors must have NC sensor outputs and be wired to the SENSOR COM terminal for monitoring
CAUTION
and powering purposes. Depending on software version, the sensor becomes powered when the gate operator's
motor runs or is always powered when the operator is connected to AC power.
E3K-R10K4-NR
NIR-50-325
Photo Eyes
(Retroreflective)
IRB-RET
E-931-S50RRGQ
IRB-MON
Photo Eyes
(Thru-Beam)
E-960-D90GQ
see latest operator manual at www.hysecurity.com/contact-us/technical-support/installation-manuals
18
hysecurity.com | 800-321-9947
HySecurity Compatible Photo Eye Sensors
Mfg. Part #
Omron
EMX
EMX
Seco-Larm
EMX
Seco-Larm
For more information visit Gate Safety at www.hysecurity.com/gatesafety or
Mfg.
40 ft max range limit
45 ft max range limit
53 ft max range limit
46 ft max range limit
65 ft max range limit
90 ft max range limit
StrongArm Programming and Operations
Details Hysecurity Part #
MX000999
MX3990
MX3657-01 Rev. D ©2020