Figure 63 Host Interface (Eternus Dx900 S5); Table 30 Status And Meaning Of Each Led (Host Interface For The Eternus Dx900 S5) - Fujitsu ETERNUS DX S5 Series Configuration Manual

A. Component Names
Controller Enclosure
●
ETERNUS DX900 S5
There are five types of host interfaces: FC 32Gbit/s, FC 16Gbit/s, iSCSI 10Gbit/s (10GBASE-SR/10GBASE-CR),
and iSCSI 1Gbit/s.
Figure 63
CA FAULT LED
CA READY LED
FC 2 ports
iSCSI 10Gbit/s (10GBASE-SR)
Port#0 Port#1
iSCSI 10Gbit/s (10GBASE-CR)
Port#0 Port#1
The states of LEDs are listed below.
Table 30 Status and Meaning of Each LED (Host Interface for the ETERNUS DX900 S5)
LED name
CA FAULT
CA READY
LINK/FAULT
Host Interface (ETERNUS DX900 S5)
LINK/FAULT LED
LINK/FAULT LED
LED status
(amber)
(green)
(green)
(amber)
FC 4 ports
LINK/FAULT LED
Port#0 Port#1 Port#2 Port#3
iSCSI 1Gbit/s
LINK/FAULT LED
Port#0 Port#1
Meaning
The host interface is in error status.
The host interface is in normal status.
The link between the host interface port and the destination
port has been established.
The host interface port is in error status.
240 Configuration Guide (Basic)