Fujitsu ETERNUS DX80 S2 User Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Storage
  5. Eternus DX80 S2
  6. User manual
Fujitsu ETERNUS DX80 S2 User Manual

Fujitsu ETERNUS DX80 S2 User Manual

Disk storage system site planning
Hide thumbs Also See for ETERNUS DX80 S2:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Configuration Manual, User Manual
P3AM-4822-12ENZ0
ETERNUS DX80 S2/DX90 S2
Disk storage system
User's Guide -Site Planning-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ETERNUS DX80 S2 and is the answer not in the manual?

Questions and answers

Related Manuals for Fujitsu ETERNUS DX80 S2

Summary of Contents for Fujitsu ETERNUS DX80 S2

  • Page 1 P3AM-4822-12ENZ0 ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Site Planning-...
  • Page 2 This page is intentionally left blank.
  • Page 3 This manual describes the environmental requirements that are necessary to install and use the ETERNUS DX80 S2/DX90 S2 Disk storage system. This manual is intended for use of ETERNUS DX80 S2/DX90 S2 Disk storage system in regions other than Japan. Please carefully review the information outlined in this manual.

  • Page 4: About This Manual

    This chapter describes the installation specifications, the installation environment, and the power requirements. ● Chapter 3 Connections This chapter describes the configuration for each interface to connect to the ETERNUS DX80 S2/DX90 S2 Disk storage system. ● Chapter 4 Rack and Optional Product Installation This chapter describes the requirements for rack installation.
  • Page 5 - Do not use alcohol or other solvents to clean the ETERNUS DX Disk storage system. Warning Layout Ribbon ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 6: Table Of Contents

    Outlet/Socket Specifications ....................37 2.6.1 Specifications for Optional Power Supply Products ..................38 2.6.2 Required Number of Outlets/Sockets ......................40 Circuit Protectors ....................... 41 ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...
  • Page 7 Standard Installation Rules Before Shipment (Only for Regions Other than EMEA&I) ..69 4.3.1 Host Interfaces .............................. 70 4.3.2 Drive Enclosures ............................71 4.3.3 Drives ................................72 4.3.4 Drive Installation Examples ........................... 77 ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...
  • Page 8 ETERNUS DX Disk storage system) .......... 52 Figure 3.9 FC connection for remote copy (redundant path) ..................53 Figure 3.10 FC connection for remote copy (using lines)....................53 ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...
  • Page 9 Figure 4.9 Drive installation example at shipment (2.5" type controller enclosure)............. 77 Figure 4.10 Drive installation example at shipment (3.5" type controller enclosure)............. 78 ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...
  • Page 10 Table 2.6 Specifications for optional power cords (for regions other than EMEA&I)............ 38 Table 2.7 Specifications for power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 1U, Max 2 enclosures connection) ........................39 Table 2.8 Specifications for power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 6 enclosures connection) ........................

  • Page 11: Chapter 1 Hardware Configurations

    The Thin Provisioning function cannot be used. The Flexible Tier function cannot be used. • Fujitsu recommends that the dual-controller types, in which the controller and I/O module are duplicated, be used in a system where a high level of reliability is required. ■...

  • Page 12: Figure 1.2 Rear View Of A 2.5" Type Controller Enclosure (Single-Controller Type)

    PWC port Power supply unit (PSU#0) Power supply unit (PSU#1) Drive interface (OUT) port Drive interface (OUT) port Host interface (CA#0) Host interface (CA#0) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 13: Figure 1.4 Top View Of A 2.5" Type Controller Enclosure

    External views of a 3.5" type controller enclosure ● Front view Figure 1.6 Front view of a 3.5" type controller enclosure 3.5" disk or 3.5" Solid State Drive (SSD) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 14: Figure 1.7 Rear View Of A 3.5" Type Controller Enclosure (Single-Controller Type)

    PWC port Power supply unit (PSU#0) Power supply unit (PSU#1) Drive interface (OUT) port Drive interface (OUT) port Host interface (CA#0) Host interface (CA#0) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 15: Controllers

    Cache memory enables high speed processing by storing frequently used data. The cache memory capacity for each controller is 2GB for the ETERNUS DX80 S2 and 4GB for the ETERNUS DX90 ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning-...

  • Page 16: Table 1.1 Host Interface Specifications

    For SFP+ modules, Short Wave Length (SWL) or Long Wave Length (LWL) types can be installed in 16Gbit/s FC interfaces. The default modules that are installed in 16Gbit/s FC interfaces are SWL type SFP+ modules. To install LWL type SFP+ modules, purchase the Long wave SFP+ modules for the DX80 S2/DX90 S2 separately.

  • Page 17: Power Supply Units

    The power supply unit transforms input AC power from a power socket to DC power and supplies power to each component. Two power supply units are installed in each controller enclosure. Each power supply unit contains fans. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 18: Drive Enclosures

    Figure 1.12 Rear view of a drive enclosure (single-IOM type) Drive interface (OUT) port Drive interface (IN) port I/O module (IOM6#0) Cover Power supply unit (PSU#1) Power supply unit (PSU#0) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 19: Figure 1.13 Rear View Of A Drive Enclosure (Dual-Iom Type)

    Top view Figure 1.14 Top view of a 2.5" type drive enclosure ● Side view Figure 1.15 Side view of a 2.5" type drive enclosure ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 20: Figure 1.16 Front View Of A 3.5" Type Drive Enclosure

    Drive interface (OUT) port Drive interface (IN) port Drive interface (IN) port I/O module (IOM6#0) I/O module (IOM6#1) Power supply unit (PSU#1) Power supply unit (PSU#0) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 21: I/O Modules

    Drive interface port specifications for I/O modules Interface Transfer speed (max.) Connector type Number of ports for each I/O module 1 (IN) 6Gbit/s QSFP 1 (OUT) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 22: Power Supply Units

    Up to nine drive enclosures can be connected to a controller enclosure as shown in the figures below. Figure 1.21 Enclosure connection path (dual-controller type) DE #09 DE #0x DE #02 DE #01 DI: Drive interface port ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 23: Drives

    Hard disk 300GB, 450GB, 600GB, 10,000rpm disks (SEDs) SCSI (6Gbit/s) 900GB Nearline SAS disks Hard disk 7,200rpm SSDs Flash memory 100GB, 200GB, 400GB, – 800GB ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 24: Drives

    A power distribution unit is an option to connect power supply units to power outlets when power sockets are limited. ■ Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 1U, Max 2 enclosures connection) There are four outlets and two inlets.

  • Page 25: Figure 1.24 Power Distribution Unit (Ac200-240V, 2U, Max 6 Enclosures Connection)

    Output cable Connection type Length Quantity ■ Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 6 enclosures connection) There are 12 outlets. Figure 1.24 Power distribution unit (AC200-240V, 2U, Max 6 enclosures connection) Outlets (OUTPUT) The following table shows the specifications of a power distribution unit and the AC cables that are provided.

  • Page 26: Figure 1.25 Power Distribution Unit (Ac200-240V, 2U, Max 8 Enclosures Connection)

    Chapter 1 Hardware Configurations 1.5 Power Distribution Units (Only for Regions Other than EMEA&I) ■ Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 8 enclosures connection) There are 16 outlets. Figure 1.25 Power distribution unit (AC200-240V, 2U, Max 8 enclosures connection) Outlets (OUTPUT) The following table shows the specifications of a power distribution unit and the AC cables that are provided.

  • Page 27: Chapter 2 Eternus Dx Disk Storage System Installation

    This chapter explains the installation of the ETERNUS DX Disk storage system. Installation Specifications 2.1.1 ETERNUS DX80 S2 The following table shows the specifications of the ETERNUS DX80 S2. Table 2.1 ETERNUS DX80 S2 installation specifications ETERNUS DX80 S2 Item 2.5"...
  • Page 28 These values are measured when a single controller enclosure and drive enclosure are configured in an environment in which the temperature is 23 ± 2°C. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED...

  • Page 29: Eternus Dx90 S2

    AC 100 – 120V 2100kJ/h 2000kJ/h Drive enclosure AC 200 – 240V 2100kJ/h 2000kJ/h Maximum Controller enclosure 4.0m /min amount of Drive enclosure 4.0m /min exhaust air ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...
  • Page 30 These values are measured when a single controller enclosure and drive enclosure are configured in an environment in which the temperature is 23 ± 2°C. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED...

  • Page 31: Storage System Dimensions

    The following diagrams show the dimensions of a 2.5" type controller enclosure. The dimension values do not include any protruding parts (approximation). Figure 2.1 2.5" type controller enclosure dimensions Side 482mm Front ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 32: Figure 2.2 3.5" Type Controller Enclosure Dimensions

    The following diagrams show the dimensions of a 3.5" type controller enclosure. The dimension values do not include any protruding parts (approximation). Figure 2.2 3.5" type controller enclosure dimensions Side 482mm Front ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 33: Drive Enclosure Dimensions

    The following diagrams show the dimensions of a 2.5" type drive enclosure. The dimension values do not include any protruding parts (approximation). Figure 2.3 2.5" type drive enclosure dimensions Side 482mm Front ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 34: Figure 2.4 3.5" Type Drive Enclosure Dimensions

    The following diagrams show the dimensions of a 3.5" type drive enclosure. The dimension values do not include any protruding parts (approximation). Figure 2.4 3.5" type drive enclosure dimensions Side 482mm Front ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 35: Package Size

    When an order for optional drives to be installed in the factory is placed, enclosures are shipped with the drives preinstalled. When optional drives are ordered without preinstallation, each drive is shipped in an individual package. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 36: Installation Area

    ETERNUS DX Disk storage systems are installed, and how many people are present in the room. When installing air conditioning, the ambient temperature should be considered. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 37: Earthquake Resistance

    (such as whether power distribution units are used or not and input voltage) are not used for the ETERNUS DX Disk storage system. This section explains the power connection specifications of the ETERNUS DX Disk storage systems. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 38: Specifications For Optional Power Supply Products

    Used for connection between the IEC60320-C14 IEC60320-C13 3.0m 250V 10A ETERNUS DX Disk storage system (Normal usage <8A) and the socket (IEC60320-C13 ↔ IEC 60320-C14) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 39: Table 2.7 Specifications For Power Distribution Unit For Dx80 S2/Dx90 S2

    ■ Power distribution units (only for regions other than EMEA&I) ● Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 1U, Max 2 enclosures connection) Table 2.7 Specifications for power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 1U, Max 2 enclosures connection)

  • Page 40: Required Number Of Outlets/Sockets

    Table 2.10 Required number of outlets and sockets to install power distribution units Product name Number of outlets Number of sockets Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 1U, Max 2 enclosures connection) Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 6 enclosures connection)

  • Page 41: Circuit Protectors

    2.7 Circuit Protectors ● Power distribution unit (2U) Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 6 enclosures connection) Up to six enclosures can be connected. Power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 8 enclosures connection) Up to eight enclosures can be connected.

  • Page 42: Figure 2.8 Breaking Characteristics Of Distribution Board Circuit Protectors

    0.06 0.04 0.02 0.01 1.5 2 5 6 7 8 10 15 20 30 40 50 80 100 Current (ratio for the current rating) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 43: Figure 2.9 Example Of A Power Supply Connection Using A Power Distribution Unit (1U)

    DE #01 Power distribution unit Line 0 Line 1 Distribution Distribution board board To power supply facility To power supply facility CP: Circuit Protector ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 44: Figure 2.10 Example Of A Power Supply Connection Using A Power Distribution Unit (2U)

    The following diagram shows a power supply connection example when a power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 6 enclosures connection) or a power distribution unit for DX80 S2/DX90 S2 (AC200-240V, 2U, Max 8 enclosures connection) is used.

  • Page 45: Figure 2.11 Example Of A Power Supply Connection Without Power Distribution Units

    DE #02 DE #01 Line 0 Line 1 CP: Circuit Protector CAUTION • Only connect the ETERNUS DX Disk storage system to circuit protectors. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 46: Chapter 3 Connections

    (such as networks for Internet access and file transfers). • CHAP CHAP authentication can prevent unauthorized access. The following CHAP authentication methods are supported: Unidirectional CHAP Bidirectional CHAP ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 47: Table 3.1 Ethernet Frame Capacity (Jumbo Frame Settings)

    When an FCoE interface is used for the HBA of the server, use FCoE for the host interface of the ETERNUS DX Disk storage system. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED...

  • Page 48: Host Connection Path

    A multipath connection configuration is recommended to maintain availability when a problem occurs. Figure 3.1 Single path connection (direct connection) Server Server Port Port Port Port CM#0 CM#1 ETERNUS DX Disk storage system ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 49: Figure 3.2 Single Path Connection (Switch Connection)

    Figure 3.3 Multipath connection (direct connection) Server Server Port Port Port Port Port Port Port Port CM#0 CM#1 ETERNUS DX Disk storage system ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 50: Figure 3.4 Multipath Connection (Switch Connection)

    When a server is duplicated in a cluster configuration and the ETERNUS DX Disk storage system is shared by multiple servers, software to control the cluster configuration is required. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED...

  • Page 51: Figure 3.5 Connection That Satisfies The System Requirements (For Availability)

    When the ETERNUS DX Disk storage system is accessed from both of the servers, performance can be secured by connecting to the ETERNUS DX Disk storage system using one host interface port on each of the four host interfaces. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 52: Remote Connections

    ETERNUS DX ETERNUS DX Disk storage Disk storage Disk storage system system system FC-RA FC-RA iSCSI-RA iSCSI-RA REC path REC path FC-RA FC-RA iSCSI-RA iSCSI-RA ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 53: Remote Interfaces

    Figure 3.11 iSCSI connection for remote copy (using lines) ETERNUS DX Disk storage system ETERNUS DX Disk storage system Copy Copy WAN (IP line) destination source iSCSI-RA iSCSI-RA Switch Switch ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 54: Connectable Models

    The transfer speed is FC 2Gbit/s. Remote connections are available only when data is migrated. Stack mode or Through mode can be used as the transfer mode. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED...

  • Page 55: Lan Connection

    The LAN port for operation management on the ETERNUS DX Disk storage system uses Ethernet (1000Base-T / 100Base-TX / 10Base-T) for the interface. IPv4 and IPv6 are supported as Internet Protocols. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED...

  • Page 56: Power Supply Connection

    Two power supply units (PSU#0 and PSU#1) are installed in each enclosure. Make sure that power cords are connected to both of the power supply units. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED...

  • Page 57: Input Power Supply Lines

    Line 1 Line 0 Figure 3.15 Single-line power supply when connecting to power sockets ETERNUS DX Disk storage system Power distribution unit Line 0 ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 58: Figure 3.16 Single-Line Power Supply When Connecting To A Ups Unit

    ETERNUS DX Disk storage system Power distribution unit Power distribution unit DE #0x DE #01 Line 0 Line 1 ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 59: Ups Connection

    If a UPS is used, make sure that it supplies power to all the enclosures. Configurations where the controller enclosure is powered by the UPS while the drive enclosures are powered directly from AC are not supported. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 60: Power Synchronized Connections

    The server UPS unit must have one unused outlet to connect to the power synchronized unit. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED...

  • Page 61: Figure 3.18 Power Control Using A Power Synchronized Unit (When Connecting One Or Two Servers)

    ETERNUS DX Disk storage system startup The server must be set to suspend server OS startup until the ETERNUS DX Disk storage system startup is complete. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 62: Figure 3.19 Power Control Using A Power Synchronized Unit (When Connecting Three Or More Servers)

    Server#0 Server#2 UPS unit for Server#2 AC sensor unit#0 Power synchronized unit#0 PWC PWC ETERNUS DX Disk storage system ETERNUS DX Disk storage system ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...
  • Page 63 Refer to the manual that is provided with a power synchronized unit for details about connection configurations with power synchronized units and required settings. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 64: Chapter 4 Rack And Optional Product Installation

    If drive enclosures are to be added in the future, securing sufficient space for power distribution units in the bottom of the rack is recommended. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED...

  • Page 65: Cable Connection

    Rack-1 Rack-2 An AC cable should not be : AC cable connected to a power distribution unit that is installed in a different rack. ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 66: Figure 4.2 Qsfp Cable Connection (Single-Controller Type)

    3m or 6m. Enclosures in different racks can be installed within this length. Figure 4.2 QSFP cable connection (single-controller type) Rack-1 Rack-2 : Cable supplied as standard : Extension cable between enclosures ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 67: Installable Racks

    4.2.1 Fujitsu Racks The ETERNUS DX Disk storage system can be installed in a Fujitsu 19-inch rack. For information about whether the ETERNUS DX Disk storage system can be installed in an EOLed rack or not, contact your sales representative.

  • Page 68: Non-Fujitsu Racks

    ETERNUS DX Disk storage systems are developed and their operation is guaranteed on the assumption that they are installed in Fujitsu 19-inch racks. Since the ETERNUS DX Disk storage system cannot be tested (for cooling and strength) in non-Fujitsu 19-inch racks, the operations of ETERNUS DX Disk storage systems cannot be guaranteed.

  • Page 69: Standard Installation Rules Before Shipment (Only For Regions Other Than Emea&I)

    This section explains the rules for combining the following optional products and standard installation rules that apply before shipment from the factory. • Host interfaces • Drive enclosures • Drives ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 70: Host Interfaces

    For a single-controller type Figure 4.5 Installation diagram for a host interface (single-controller type) Port Port Port Port CA#0 CA#1 Expansion Controller 0 (CM#0) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 71: Drive Enclosures

    Drive enclosure (2.5inch) For the ETERNUS DX80 S2/DX90 S2, up to nine drive enclosures can be installed. When only 2.5" type enclosures are used for the ETERNUS DX80 S2, up to four drive enclosures can be installed. DE-IDs are automatically assigned for a drive enclosure based on the installation order.

  • Page 72: Drives

    400GB (MLC) x 1 Hot spare 800GB (MLC) x 2 RAID1 800GB (MLC) x 6 RAID1+0 800GB (MLC) x 4 RAID5 800GB (MLC) x 1 Hot spare ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...
  • Page 73 Disk Drive (2.5inch) 900GB/10krpm x 2 RAID1 900GB/10krpm x 6 RAID1+0 900GB/10krpm x 6 RAID5 900GB/10krpm x 6 RAID6 900GB/10krpm x 1 Hot spare ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 74: Figure 4.7 Installation Diagram For 2.5" Drives

    4.6. Then, install drives in the slots of a drive enclosure from Slot#0 to Slot#23 in ascending order. Figure 4.7 Installation diagram for 2.5" drives ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 75: Table 4.7 Priority Order Of 3.5" Drive Installation

    Disk Drive (3.5inch) 450GB/15krpm x 2 RAID1 450GB/15krpm x 6 RAID1+0 450GB/15krpm x 6 RAID5 450GB/15krpm x 6 RAID6 450GB/15krpm x 1 Hot spare ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 76: Figure 4.8 Installation Diagram For 3.5" Drives

    4.7. Then, install drives in the slots of a drive enclosure from Slot#0 to Slot#11 in ascending order. Figure 4.8 Installation diagram for 3.5" drives Slot#11 Slot#8 Slot#9 Slot#10 Slot#4 Slot#5 Slot#6 Slot#7 Slot#0 Slot#1 Slot#2 Slot#3 ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 77: Drive Installation Examples

    2.5" SAS (450GB, RAID6) 2.5" SAS (600GB, RAID5) 2.5" SAS (600GB, hot spare) 3.5" Nearline SAS (2TB, RAID5) 3.5" Nearline SAS (2TB, hot spare) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...

  • Page 78: Figure 4.10 Drive Installation Example At Shipment (3.5" Type Controller Enclosure)

    3.5" Nearline SAS (2TB, hot spare) 2.5" SSD (200GB, RAID5) 2.5" SSD (200GB, hot spare) 2.5" SAS (300GB, RAID1) 2.5" SAS (300GB, hot spare) ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning- Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0...
  • Page 79 However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. • Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual.

This manual is also suitable for:

Eternus dx90 s2

Table of Contents