Powering On; Switching On And Off The Main Line Switch On The Power Distribution Unit; Switching On And Off The Psu Switch On The Power Supply Unit; Figure 8 On Position (Marked "|") Of The Main Line Switches On A 1U Power Distribution Unit - Fujitsu ETERNUS DX S5 Series Configuration Manual
Hybrid storage systems
Hide thumbs
Also See for ETERNUS DX S5 Series:
- Design manual (335 pages) ,
- Operation manual (basic (135 pages) ,
- Configuration manual (75 pages)
Table of Contents
Advertisement
5. General Settings
Powering On
Powering On
This section explains how to turn on the ETERNUS DX.
Switching On and Off the Main Line Switch on the Power Distribution Unit
Turn the main line switch of the power distribution unit to the ON position (marked "|").
IMPORTANT
Make sure all of the main line switches are in the ON position.
●
For 1U
Figure 8
ON Position (Marked "|") of the Main Line Switches on a 1U Power Distribution Unit
Main line switch
●
For 2U
Figure 9
ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit
Main line switch
Switching On and Off the PSU Switch on the Power Supply Unit
Move the PSU switch on the power supply unit of the controller enclosure and drive enclosures to the ON
position (marked "|"). Note that power supply units for the ETERNUS DX500 S5/DX600 S5/DX900 S5 controller
enclosures and high-density drive enclosures do not have PSU switches.
IMPORTANT
Make sure all of the PSU switches are in the ON position.
67
Configuration Guide (Basic)
Hide quick links:
Advertisement
Table of Contents
