Fujitsu ETERNUS DX S5 Series Configuration Manual page 166

8. Monitoring Settings
Various Notification Settings
(3)
Select the Manager No. that was set in
the [OK] button.
The screen returns to the trap list of the [Setup SNMP Agent Trap] screen.
(4)
Check the trap that was set in
A confirmation screen appears.
(5)
Click the [OK] button.
The SNMP Trap settings are applied.
(6)
Check the setting completion message and click the [Done] button.
The screen returns to the [Network] screen.
6
Download the MIB file.
Download the MIB file that is registered in the ETERNUS DX.
(1)
Click [Download MIB File] in [Action].
The [Download MIB File] screen appears.
(2)
In the [Download MIB File] screen, set the required items and click the [Download] button.
Note
Select the "The ServerView control code is added to the comment line of the MIB definition
file" checkbox when downloading the MIB file for monitoring the ETERNUS DX by ServerView.
Step 3 for [Manager No.], set the required items, and click
Step (3) is added in the trap list and click the [Set] button.
166 Configuration Guide (Basic)