Fujitsu ETERNUS DX S5 Series Configuration Manual page 42

3. Rack Installation
High-Density Drive Enclosure Installation
2nd hole
(M4 screw)
3
Install the stopper bracket (for left side) and the stopper bracket (for right side).
Attach the stopper bracket to the front rack pillar.
Stopper bracket
(left)
M5 screw
The M5 screw positions for the stopper brackets are determined by the high-density drive enclosure base
line.
Insert the M5 screws in the seventh holes above the base line to fasten the stopper brackets.
7th hole
(M5 screw)
4
Install the flap brackets.
Attach flap bracket A and B on the right side of the rear rack pillar with the M4 screws.
High-density drive enclosure
Front/Rear
[Left]
4U
High-density drive
enclosure base line
Rack rail
Rack rail
(left)
M5 screw
(Rack pillar: front)
High-density drive enclosure
Front
[Left]
4U
High-density drive
enclosure base line
Rack rail
[Right]
2nd hole
(M4 screw)
(Rack pillar: rear)
Rack rail
(right)
Stopper bracket
(right)
[Right]
7th hole
(M5 screw)
42 Configuration Guide (Basic)