Figure 75 2.5" Drives And 3.5" Drives; Table 35 Status And Meaning Of Each Led (Drive) - Fujitsu ETERNUS DX S5 Series Configuration Manual

A. Component Names
Drive Enclosure
■
Drives
2.5" drives and 3.5" drives have LEDs.
Figure 75 2.5" Drives and 3.5" Drives
2.5" drive
DRIVE READY LED
DRIVE FAULT LED
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 35 Status and Meaning of Each LED (Drive)
LED name
DRIVE READY
DRIVE FAULT
3.5" drive
DRIVE READY LED
DRIVE FAULT LED
LED status Meaning
The drive is in normal status.
(green)
(blinks green)
•
(amber)
•
250
Drive for high-density drive enclosure
The drive is in error status.
The LED light up operation was performed from the ETERNUS CLI
command line in order to identify the drive location.
Configuration Guide (Basic)