Configuration Procedure - Fujitsu ETERNUS DX S5 Series Configuration Manual

11. Solution Configuration
Green
■

Configuration Procedure

Perform the required settings for Eco-mode. These settings can be performed with either ETERNUS SF Storage
Cruiser or ETERNUS Web GUI.
To set the visualization of power consumption and temperature, use ETERNUS SF Storage Cruiser. ETERNUS SF
Storage Cruiser obtains power consumption of the ETERNUS DX for "power consumption" and ambient
temperature (intake air temperature for the fans) for "temperature".
●
Required Environment
ETERNUS SF Storage Cruiser is required to visualize (graphically display) the power consumption and
temperature.
●
Configuration Procedure
Eco-mode
Perform the following settings with the operation management server (ETERNUS SF Storage Cruiser) or
ETERNUS Web GUI:
• Eco-mode setup
Enable the Eco-mode for the ETERNUS DX.
Eco-mode schedule setup
•
Set the schedule to apply Eco-mode. Register the time period to turn on the disk motors or turn on the
disk power for backups as well as the RAID group that contains these target disks.
Visualization of the power consumption and the temperature
Register the ETERNUS DX storage systems that are the targets for performance management in the
operation management server (ETERNUS SF Storage Cruiser).
For more details on the settings for ETERNUS SF Storage Cruiser, refer to "ETERNUS SF Storage Cruiser
Operation Guide".
194 Configuration Guide (Basic)