When Power Distribution Units (1U) Are Installed - Fujitsu ETERNUS DX S5 Series Configuration Manual

4. Connecting Cables
Power Cord Connection
2
Connect the power cords to the socket.
Connect the plug at the other end of each power cord to the socket.
IMPORTANT
Connecting two power cords for each enclosure to different two power supply facilities improves the
availability of the power supply facilities against failures.

When Power Distribution Units (1U) Are Installed

The following procedure explains how to connect the power cord when a 1U power distribution unit is installed.
1
Remove the power cord clamps or the cable holders from the power distribution unit.
Power distribution unit
2
Connect the power distribution unit outlets and power supply unit inlets with the power cords (AC output
cables).
The procedure to connect the power supply unit is same as
Are Installed" (page
• Do not use the server service outlet to connect a power cord for the
ETERNUS DX.
58).
59
Cable holder
Step 1 in "When No Power Distribution Units
Configuration Guide (Basic)