Fujitsu ETERNUS DX S5 Series Configuration Manual page 119

6. Configuration Settings for RAID Groups or Thin Provisioning
When Using SnapOPC+ (SDVs and SDPVs)
The procedure to create a copy data destination volume (SDPV) is as follows:
1
Click the [Volume] tab on the navigation of the ETERNUS Web GUI screen.
The [Volume] screen appears.
2
Click [Create] in [Action].
The [Create Volume] screen appears.
3
Set the required items in the [Create Volume] screen and click the [Create] button.
Name: sdpv
Capacity: 500GB
Type: Snap Data Pool Volume
RAID Group / TPP Selection: Manual
Manual Setting: RG1
A confirmation screen appears.
4
Click the [OK] button.
The volume is created and the registration completion screen appears.
5
Click the [Done] button.
The screen returns to the [Volume] screen.
119 Configuration Guide (Basic)