Fujitsu ETERNUS DX S5 Series Configuration Manual page 18

1. Configuration Workflow
ETERNUS DX60 S5/DX100 S5/DX200 S5
■
From Completion of the Initial Setup to Completion of the Configuration (When Using the
Smart Setup Wizard)
Set the date, SNMP and Syslog
"Initial Setup 2 (Optional)"
Set the ETERNUS DX for connection
Configure the monitoring settings
"8. Monitoring Settings"
Configure the power control settings
"9. Power Control Setup"
Check the system status
"10. System Status Check"
Completion of the configuration
: Required
: Optional
: ETERNUS Web GUI operation
Completion of the initial setup
ETERNUS DX
Set the firewall
"Firewall Settings"
"Smart Setup Wizard"
Host (server)
Prepare the server for connection
"Server Connection Preparation"
18 Configuration Guide (Basic)